Owner's Manual
Table Of Contents
- COMPUTER SOFTWARE COPYRIGHTS
- Introduction
- What is the PowerPad Terminal
- Unpacking
- Charging the Battery
- Figure 3. Battery Installation and Removal
- Battery Installation and Removal
- 1. Insert the battery, bottom end first, into the battery compartment (see Figure 3).
- 2. Carefully press the battery top downward until it clicks into place. When PowerPad is powered ...
- 1. Turn the PowerPad off by holding the Power button pressed (see Figure 1), for at least four se...
- 2. Press the Release Buttons on the battery sides (see Figure 3) and pull the away battery from t...
- The Universal Office Dock (UOD) Unit
- First Time Battery Charge
- Routine Battery Charge
- Battery Maintenance
- Battery Storage
- Extending Battery Life
- Using the PowerPad
- Maintaining the PowerPad
- Accessories
- Troubleshooting
- Safety Instructions
- SPECIFICATIONS
12
LED slowly blinks green - PowerPad in Suspend mode.
LED quickly blinks green - PowerPad is charged in UOD unit.
Using the Stylus Pen
The Stylus pen selects items and
enters information. Use the pen as
you use your PC mouse.
• To open and select screen
items, tap on the item with the
pen.
• To drag text or image items,
hold the pen on the item and
drag across the screen.
• To see a list of actions avail-
able for a specific item, tap-
and-hold the pen on an item.
When the pop-up menu
appears, tap the action you
want to perform.
Figure 6. Using the Stylus Pen