Owner's Manual
Table Of Contents
- COMPUTER SOFTWARE COPYRIGHTS
- Introduction
- What is the PowerPad Terminal
- Unpacking
- Charging the Battery
- Figure 3. Battery Installation and Removal
- Battery Installation and Removal
- 1. Insert the battery, bottom end first, into the battery compartment (see Figure 3).
- 2. Carefully press the battery top downward until it clicks into place. When PowerPad is powered ...
- 1. Turn the PowerPad off by holding the Power button pressed (see Figure 1), for at least four se...
- 2. Press the Release Buttons on the battery sides (see Figure 3) and pull the away battery from t...
- The Universal Office Dock (UOD) Unit
- First Time Battery Charge
- Routine Battery Charge
- Battery Maintenance
- Battery Storage
- Extending Battery Life
- Using the PowerPad
- Maintaining the PowerPad
- Accessories
- Troubleshooting
- Safety Instructions
- SPECIFICATIONS
8
First Time Battery Charge
The first time battery charge ensures maximum start capacity for
the battery. Charge your new battery for at least 24 continuous
hours before using it or until the LED indicator of the UOD shows
green. During the charge, the LED indicator of the PowerPad
shows green and blinks quickly. The UOD charges your battery
effectively when it is at room temperature [approx. 68°F (20° C)].
Battery charging temperature range is 32°F
to 113°F (0°C to 45°C).
Table 1: Status of a UOD Slot LED During Battery Charge
Slot LED Status Indication
No Light No device inserted.
Blinking Amber Battery temperature out of tolerance and
charging has been temporarily stopped.
Solid Amber PowerPad Battery is being charged.
Solid Green PowerPad Battery is at least 90% charged
after 2.5 hours and fully charged after 3.
Solid Red PowerPad Battery is not fully charged
after 3 hours of charging, and is consid-
ered failed.