User's Manual

Resetting the HDT 600

At times, you may need to reset

your HDT 600.

If your HDT 600 stops respond-

ing, perform the following

actions:

Warm Boot

Important Note: When HDT

600 is warm booted, all informa-

tion remains stored in memory.

1. Simultaneously, press soft

keys 1, 2 and the Power but-

ton for at least 5 seconds;

the HDT 600 will function

again.

If your HDT 600 still does not

respond perform:

Cold Reset

Important Note: When HDT 600 is cold reset, all information

stored in its memory will be lost.

2. Simultaneously, press soft keys 2, 3 and 4 for at least five sec-

onds to restart your HDT 600. The operation system will

reboot in approximately one minute.

Power Button

Inca very small format.book Page 13 Thursday, May 22, 2003 7:57 PM