User Card

Cold Reset

Cold reset restarts the

Powerpad by erasing

all stored records and

entries.

Do Not perform Cold

reset unless Warm reset

does not resolve your

problem.

Cold reset is per-

formed by removing

the battery and insert-

ing a pin shaped object

into the hole located on

the back side of the

memory cards door

(see Figure 9).

Maintaining the Powerpad

In order to maintain your Powerpad in good working order:

• Do not scratch the screen. Use only Motorola supplied stylus

pen with the touch-sensitive screen.

• Never use a pen or pencil or any sharp object on the screen.

• Although your Powerpad is water and dust resistant, do not

expose it to rain or moisture for long periods of time.

• Protect your Powerpad from temperature extremes. Do not

leave the Powerpad on the dashboard of a car on a hot day, and

keep the Powerpad away from hot places.

• Do not drop your Powerpad or subject it to strong impact.

Memory Cards Door

For Cold Reset: insert a pin

shaped object into the hole

Figure 9. Cold Reset

Reset hole