User's Manual

18
What to Do If
Table 2: Troubleshooting
Problem Cause Solution
HDT 600 does
not turn on.
Battery not
charged.
Ensure proper battery instal-
lation in HDT 600.
Charge or replace the battery.
HDT 600 in Sus-
pend mode.
Press the Power Button.
HDT 600 red
LED does not
stop blink or
battery refuse
to charge.
HDT 600 is not
locked in Cradle.
Reinstall HDT 600 in Cradle.
Lock the HDT 600 properly
in Cradle (See that the HDT
600 and Cradle red LEDs are
on) and charge for 6 hours.
Battery tempera-
ture is incorrect
Ensure that the battery tem-
perature range is -0 to 45
° C
Bad battery. Replace battery.
HDT 600 does
not detect scan
input.
LASER beam does
not cover the entire
barcode symbol.
Scan again and make sure
that the entire barcode sym-
bol is covered.
Unreadable bar-
code.
Be sure the barcode symbol
is not covered.