User's Manual
Table Of Contents
8
Charging the Battery
The battery remaining capacity indication may show by the LED
indicator of your HDT 600 (see figure below). Note that the HDT
600 can either be in On, Off or Suspend mode, while charging.
To avoid damage and provide optimal performance of
the HDT 600 and Cradle, use only the Power Supply
provided by your company.
To charge the battery, perform the following steps:
1. Connect the power cable to the socket at the base of the Cradle.
2. Slide the HDT 600 into the Cradle and lock the HDT 600
inside by pushing it towards the back of the Cradle.
Press to unlock
Red LED indicating
HDT 600 locked
Push back to lock
HDT 600 into Cradle
into Cradle
Press to unlock
Red: charging
Green: battery full
Red blinks: charging problem
LED indicator
HDT 600
HDT 600
!
Caution