User's Manual

7
1. Turn the HDT 600 off by holding the Power button pressed for
at least two seconds.
2. Release the terminal hand strap as shown in the figure above.
3. Use a coin to unlock the battery by turning the battery lock
counter-clockwise.
4. To remove the battery, lift the left-hand side of the battery and
pull it out.
First Time Battery Charge
The battery is charged when installed inside the HDT 600. Charge
your new battery for at least six continuous hours before using it or
until the LED indicator of the HDT 600 turns from red to green.
The first time charge is referred to as initializing and will ensure
maximum battery start capacity. The HDT 600 Cradle charges your
battery effectively when it is at room temperature (approx. 20
° C).
Battery charging temperature range is 0
°C to 45°C.