User's Manual

8
Charging the Battery
The LED indicator displays your charge status (See figure below).
Please note that the HDT 600 can be On, Off or in Suspend mode
while charging.
To avoid damage and provide optimal performance of
the HDT 600 and Cradle, use only a Motorola approved
power supply.
To charge the battery, perform the following steps:
1. Connect the power cable to the socket at the base of the Cradle.
2. Slide the HDT 600 into the Cradle and lock the HDT 600
inside by pushing it towards the back of the Cradle.
Press to unlock
Red LED indicating
HDT 600 locked
Push back to lock
HDT 600 into Cradle
into Cradle
Press to unlock
Red: charging
Green: battery full
Red blinks: charging problem
LED indicator
HDT 600
HDT 600
!
Caution
Inca very small format.book Page 8 Thursday, May 22, 2003 7:57 PM