Instruction Manual

Delivery

Delivery Package Screen

The Delivery Package screen is where you enter all delivery information about each package.

Street # Street Name Type Dir Suf

121 SIR WILLIAM BLVD

----------------------------------------

4 Col Amt Ship # ID# Remark

1 #994934 W

2 #517821 E

3 #123456 E

Edit Dup Ship#6 +Paper

COD NonDel PkgInfo PreRec Deliver

Delivery Package Screen

Note: The top two lines of the Delivery Package screen display the address information for the

stop.

Delivery Package Screen Definitions

• “4” – Indicates the Driver Release risk level (for that address).

• Col Amt - Shows the collection/C.O.D. amount entered for each package. Press the Soft

key ¤ located directly beneath the “COD” function to access the C.O.D. screen and enter

the collection amount. For more on C.O.D. collections, see pages 36-38.

• Ship # (Shipper Number) - Requires that six characters be entered in the field. If a

shipper number is not available and you enter a name with fewer than six characters:

1. Enter name (e.g. ABC). Press Cycle key to highlight upper line.

2. Press Soft key ¤ directly beneath “Ship#6” and then press Enter è to move the

cursor to the “ID#” field.

• ID# (Package Identification Number) - If there are fewer than three characters,

press Enter è to move the cursor to the “Remark” field.

• Remark - This field is for specific information, such as left at, Non-Delivery, and package

type.

• Line Number (1) - Line number of packages recorded (1 to 999)