Instruction Manual

Statistics Menu

Inside Building (Statistics Card Option 2)

This screen contains fields for entry of specific activities performed while inside the center.

Inside Building Data Entry Procedure

From the Statistics Card Menu, press 2. Inside Building screen is displayed with cursor in first

empty field.

Inside Building [08:30]

Start Finish Counts

Srt&Ld : : DT Unload 0

LocSrt : : DT Load 0

Wash

Trip 1 : : N Recovery 0

Trip 2 : : N High Value 0

Trip 3 : : N Waybill 0

Yes No

Inside Building Screen

Inside Building Data Field Definitions

• “Srt&Ld” (Sort and Load) – Enter times under “Start” and “Finish” for any package

sorting or vehicle loading activities before departure from the center in the morning.

• “LocSrt” (Local Sort) - Enter times under “Start” and “Finish” for any unloading of

vehicles at the end of the working day.

• “Trip 1”, “Trip 2”, and “Trip 3” - Enter the time you leave UPS property (under

“Start”) and the time you return to UPS property (under “Finish”) for up to three separate

trips during a workday.

• “Wash” – Field has a default of no (“N”). Press soft key under “Yes” if you washed the

vehicle on the associated trip.

• “DT Unload” (Double Trip Unload) - Enter the number of packages unloaded after

each trip when the same vehicle is to be used for an additional trip.

• “DT Load” (Double Trip Load) - Enter the number of packages loaded for an

additional trip after returning from a previous trip.

• “Recovery” - Enter the number of packages unloaded at a recovery point, that are not

clerk packages or send again packages.

• “High Value” - Enter the number of packages that require additional processing during

the End-of-Day routine.

• “Waybill” - Enter the number of international shipments picked up.