Instruction Manual

P.M. Routine

DIAD III Maintenance

• While the DIAD III is designed to be rugged and resistant to damage, it is still a sensitive

piece of electronic equipment.

Ø Use only the stylus marked “DIAD III ONLY” when obtaining a customer or turn in

signature. Using any other object will damage the display screen.

Ø Special care needs to be taken to protect the display from scratches.

Ø The DIAD III is equipped with a handle, which retracts when not in use.

Ø The DIAD III should be visually inspected for any cracks or broken or missing parts. If

any faults are found, the unity should be returned for repair. The rubber feet located on

the bottom of the unit should also be inspected for wear.

Ø The battery compartment should be checked to ensure that the holding screw is in the

fully locked position.

• The DIAD III should be cleaned twice per week (or as needed) with a towel from the

DIAD cleaning station. To keep the unit in good working order, it is crucial that all

electrical contacts, optical windows, and other critical areas be kept clean and free of

debris.