Instruction Manual

P.M. Routine

DIAD RESTART

The DIAD is able to restart after certain recoverable faults. These might include network switch

or certain hardware-related items. After a brief delay to restart the system, you can continue to

use the DIAD with most of the previous data intact.

1. When the DIAD determines that a recoverable fault has occurred, the DIAD Restart screen

displays.

DIAD Restarting

Unexpected Restart

Please Wait....

DIAD Restart Screen

2. The DIAD Restart Screen will show one of the following messages:

• “Network Switch” indicates no radio coverage, switching to cellular network.

• “Unexpected Restart” indicates a possible hardware problem.

Note: This process takes approximately 30 seconds to complete.

3. After restart occurs, the Acknowledge DIAD Restart screen displays.

Restart Completed

Unexpected Restart

Please Verify Last Information Entered

Press BIG UP to Continue

Acknowledge DIAD Restart Screen

4. You must acknowledge this screen by pressing Big Arrow Up The DIAD will return

to the function that was active prior to the restart.

Note: The DIAD will attempt to restart a defined number of times (default is five) during the

day. After reaching that defined number, the DIAD will go to Basecom without any

additional restart attempts.