Instruction Manual

Inc.

PRINT (Main Menu Option 7)

This option is used for uploading delivery stop information so it can be printed at the customer’s

location using either:

• Print Buffer (replaces the PAS)—A small print buffer box uploads delivery data from

the DIAD using a DOI, and prints directly on the customer’s printer, or

• Print At Stop (PAS)—A small printer and DOI (DIAD Optical Interface) held in a

carrying case.

Note: A limited number of these are left in the field.

Transmitting Data

1. Make sure the optical window on the DIAD (under the DIAD on the upper-right corner) is

aligned with the DOI (DIAD Optical Interface). This has to be a snap-on clip with DIAD

III.

2. After recording all the packages at the stop and clarifying the customer signature, press

Stop Complete 4.

3. Press Big Arrow Up . The Main Menu appears.

4. Press 7 (“Print”). The DIAD screen displays the Print Stop Menu List.

121 LINE TECHNOLOGY

SIR WILLIAM BLVD

ASEANA Rm 502 Flr 5

-----------------------------------Stp #

GALLOW ISLAND 1

ISLE CREEK 2

UNIVERSITY CENTRAL S 3

SIR WILLIAM BLVD 4

Print Stop Menu List

5. Use the appropriate key to select the desired stop information to be transmitted to the

buffer or PAS printer. Press Enter è. The Printer Check Off List appears.

Printer Check Off List

1. Printer on?

2. Printer on line?

3. Paper properly aligned?

4. DIAD connected to printer?

Press ENTER to continue ESCAPE to cancel