Quick Start Guide

QUICKSTART GUIDE | VT-100 15
LANYARDS
The Motorola Solutions lanyard (AC-LANYARD-05) is a long piece of sturdy polyester ribbon, with a split ring at
each end and a phone strap attached to each split ring. It has five break points for added safety - allowing for
quick release if pulled on.
To attach a VT-100:
• Unclip both phone straps from the lanyard
• Push each of the phone straps through the two small
holes (tether points) in both corners of the VT-100
• Loop through to secure
• Re-attach to the lanyard clips
• Put the lanyard on and adjust length to suit using the
break points
Your VT-100 is now securely attached to your uniform