Quick Start Guide

QUICKSTART GUIDE | VT-100 11
VT-100 KLICK FAST STUD
To attach a Klick Fast stud to your VT-100, you will need:
• A VT-100
• A VT-100 Klick Fast Stud (VT-100-FIX-KF-ALT)
• A Klick Fast dock (usually on a uniform),
Firstly, pinch the two metal clips on the back of the stud together, and slide the attachment into the mounting
rail on the back of your device until a firm click is heard. Release the metal clips.
Slide the VT-100 into the Klick Fast dock upside-down, so the device’s serial number is pointing towards the
ceiling. Once the stud is firmly attached to the dock, rotate the VT-100 by twisting it until it is the right way up.
To detach a Klick Fast stud from the Klick Fast dock, rotate the device by 180 degrees, so the VT-100 is upside
down again. The stud should slide out of the dock easily. It is now possible to detach the stud from the VT-100.
To do so, pinch the two metal clips on the back of the stud together, and slide the stud upwards out of the
attachment rail.