User's Guide

m
WM500
Remote Speaker
Microphone
PMMN4127_
User Leaflet
*MN006039A01*
MN006039A01-AC
Notice to Users (FCC and Industry
Canada)
This device complies with part 15 of the FCC
Rules and Industry Canada license-exempt
RSS standard(s). Operation is subject to the
following conditions:
• This device may not cause harmful interfer-
ence.
• This device must accept any interference
received, including interference that may
cause undesired operation.
• Changes or modifications made to this
device, not expressly approved by Motorola
Solutions, could void the authority of the user
to operate this equipment.
Supplier’s Declaration of Conformity
Per FCC CFR 47 Part 2 Section 2.1077(a)
Responsible Party
Name: Motorola Solutions, Inc.
Address: 1303 East Algonquin Road,
Schaumburg, IL 60196-1078, U.S.A.
Phone Number: 1-800-927-2744
Hereby declares that the product:
Model Name: WM500
conforms to the following regulations:
FCC Part 15, subpart B, section 15.107(a),
15.107(d), and section 15.109(a)
Class B Digital Device
As a personal computer peripheral, this
device complies with Part 15 of the FCC
Rules. This device complies with Industry
Canada licence-exempt RSS standard(s).
Operation is subject to the following
conditions:
1. This device may not cause harmful inter-
ference.
2. This device must accept any interference
received, including interference that may
cause undesired operation.
Notice: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation.
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and
the Stylized M logo are trademarks or registered
trademarks of Motorola Trademark Holdings, LLC and
are used under license. All other trademarks are the
property of their respective owners.
© 2019 Motorola Solutions, Inc. All rights reserved.
Printed in
If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is encouraged
to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equip-
ment and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio
or TV technician for help.
Avis aux utilisateurs (FCC et Industrie
Canada)
Le présent appareil est conforme aux CNR
d'Industrie Canada applicables aux appareils
radio exempts de licence et à la partie 15 des
règlements de la FCC :
• Cet appareil ne doit pas causer d'inter-
férence nuisible.
• Cet appareil doit accepter toute inter-
férence reçue, y compris les interférences
pouvant entraîner un fonctionnement indésir-
able.
• Toute modification effectuée à cet appareil
sans l'autorisation explicite de Motorola Solu-
tions peut annuler l'autorisation d'utiliser cet
appareil.
Déclaration de conformité du
fourmisseur
Règlement CFR 47 partie 2 section 2.1077(a)
de la FCC
Partie responsable
Nom : Motorola Solutions, Inc.
Adresse : 1303 East Algonquin Road,
Schaumburg, IL 60196-1078, U.S.A.
Numéro de téléphone : 1-800-927-2744
Déclare par les présentes que le produit :
Nom de modèle : WM500
sont conformes aux réglementations
suivantes :
Partie 15, sous-partie B, section 15.107(a),
15.107(d) et section 15.109(a) des
règlements de la FCC
Appareil numérique de Classe B
En tant que périphérique d'ordinateur
personnel, cet appareil est conforme aux
stipulations de la partie 15 des
règlements de la FCC. Cet appareil est
conforme aux CNR d'Industrie Canada
applicables aux appareils radio
exempts de licence. Son utilisation est
assujettie aux deux conditions suivantes :
1. Cet appareil ne doit pas causer
d'interférence nuisible.
2. Cet appareil doit accepter toute
interférence reçue, y compris les
interférences pouvant entraîner un
fonctionnement indésirable.
AVIS:Cet équipement a fait l'objet de tests et
a été déclaré conforme aux limites établies
pour un appareil numérique de classe B,
conformément à la section 15 des règlements
de la FCC. Ces limites sont fixées afin d'offrir
une protection suffisante contre des
interférences nuisibles dans une installation
résidentielle. Cet équipement génère, utilise
et peut émettre de l'énergie de
radiofréquence et, s'il n'est pas installé ou
utilisé conformément aux instructions, il peut
provoquer un brouillage nuisible aux
communications radio. Cependant, il est
impossible de garantir qu'il n'y aura aucune
interférence dans une installation particulière.
Si cet appareil cause une interférence
nuisible à la réception de la radio ou de la
télévision, ce qui peut être déterminé en
éteignant et en allumant l'appareil, vous êtes
encouragé à remédier à la situation en
prenant une ou plusieurs des mesures
suivantes :
• Réorienter ou déplacer l'antenne
réceptrice.
• Augmenter la distance entre l'équipement
et le récepteur.
• Brancher l'appareil dans une autre prise
sur un circuit différent de celui du récepteur.
• Consulter un revendeur ou un technicien
de radio ou de télévision chevronné pour
obtenir de l'aide.
RF Energy Exposure and Product
Safety Guide for Portable Two-Way
Radios
Before using this product, read the RF Energy
Exposure and Product Safety Guide that
ships with the radio which contains
instructions for safe usage and RF energy
awareness and control for compliance with
applicable standards and regulation.
Acoustic Safety
Exposure to loud noises from any source for
extended periods of time may temporarily or
permanently affect your hearing. The louder
the radio’s volume, the less time is required
before your hearing could be affected.
Hearing damage from loud noise is
sometimes undetectable at first and can have
a cumulative effect. To protect your hearing:
• Use the lowest volume necessary to do
your job.
• Turn up the volume only if you are in noisy
surroundings.
• Turn down the volume before connecting
headset or earpiece.
• Limit the amount of time you use headsets
or earpieces at high volume.
• When using the radio without a headset or
earpiece, do not place the radio’s speaker
directly against your ear.
• If you experience hearing discomfort,
ringing in your ears, or speeches that are
muffled, you should stop listening to your
radio through your headset or earpiece,
and have your hearing checked by your
doctor.
Important Information
• Do not charge your accessory in
temperature below 0 °C (32 °F) or
above 45 °C (113 °F). Do not store
your accessory in direct sunlight or
where expected temperatures can
exceed this range such as inside a parked
car.
• Storing your fully charged accessory in
high temperature conditions may
permanently reduce the life of the internal
battery.
• Battery life may temporarily shorten in low-
temperature conditions.
• The Remote Speaker Microphone (RSM)
should be stored between -10 °C (14 °F)
and 30 °C (86 °F) to minimize battery
permanent capacity loss.
• To prevent injury, do not disassemble,
puncture, or crush the RSM because this
action can cause the battery to short-
circuit.
• Do not expose or throw the RSM into heat
or fire.
• Do not dispose the RSM into household
waste.
• Do not fill the audio jack and USB charging
port with water. If water enters the audio
jack and/or USB charging port, remove
water by shaking the RSM. Always cover
the audio jack and USB charging port with
a dust cap when not in use.
!
C a u t i o n
RSM Overview Radio/Device Compatibility
• LEX Series
• SLN 1000
• TLK 100
• Other compatible non-Motorola Solutions
devices
• These accessories can be paired with a Kodiak
Broadband PTT enabled device. Currently, the
supported Kodiak feature is Operational Status
Messaging (the additional features will be added
in the future), please refer to your Kodiak User
Guide for setup instructions.
• The MAC Address is located behind the belt
clip and on top of individual box.
• Additional MAC Address labels are provided in
the individual box.
7
6
8
9
3
2
1
11
10
5
4
15
16
12
13
14
Table 1: RSM Overview and Description
No. Description
1 Volume toggle
2 Power Indicator
3 Power button
4
Push-To-Talk (PTT) button (for group
call)
5 Answer/End-Call button (for private call)
6 P1 Programmable button
7 Channel Down button
8 Channel Up button
9 P4 Programmable button
10 Audio/Bluetooth Indicator
11 Emergency button
12 Microphone
13 Speaker
14 Charging port
15 NFC Location
16 Audio jack
Table 2: Compatible Parts and Accessories
Part Number Description
PMLN7560_
Receive-only earpiece with
translucent tube
42009312001
Belt Clip
4205823V01
CB000756A01 USB-C Cable (1 m)
MN006039A01.fm Page 1 Wednesday, October 30, 2019 5:14 PM
DRAFT