User's Manual

12
LCD DISPLAY
Initial Power-Up
Once the batteries are installed in
the unit, the Call Button blinks and
LCD display shows
Interface ENA.
If the USB Serial Interface is not
to be used, press the ESC button
to exit this mode. The default
status screen will be shown on the
display. If nothing is pressed, the
unit will enter sleep mode after 60
seconds and the screen will clear.
Status Screen
The Status Screen toggles the
current Frequency and CTCSS
setting continuously.
Freq No: 6
MHZ:467.8750
INTERFACE ENA
-ESC to EXIT-
INTERFACE ENA
-ESC to EXIT-
CB200-U CB200-M
Insert BatteryInsert Battery
Press Esc Press Esc
Freq No: 6
MHZ:151.6250
CTCSS CODE: 1
67.0 HZ ANA
CTCSS CODE: 1
67.0 HZ ANA
Channel Spacing
12.5 KHZ