User's Guide

DUAL-UNIT CHARGER PMLN6714_

English

Troubleshooting

If There is Fast Flash Red Indication:

1 Confirm the battery being used with the WRSM is listed in Table 4.1

and is good in condition.

2 Confirm that the power supply being used with the WRSM is listed

in Table 4.2 and is good in condition.

3 Remove the battery and restart the Dual-Unit Charger.

4 If the symptom persist, please send the Dual-Unit Charger to the

nearest Service Center for further verification.

If There is No LED Indication:

1 Check that the WRSM with battery or the battery is inserted

correctly in the pocket.

2 Make sure that the power supply is plugged into an appropriate AC

outlet and the LED on the power supply is on.

3 Ensure that the power supply cable is plugged securely into the

charger socket.

4 Confirm that the battery being used with the WRSM is listed in Table

4.1.

5 If the symptom persist, please send the Dual-Unit Charger to the

nearest Service Center for further verification.