User's Guide

WIRELESS RSM PMMN4095_

English

Secondary Receiver Audio Accessory

When a secondary accessory is plugged into the audio jack, audio will

be routed through secondary accessory

Attaching Secondary Receiver Audio Accessory

Lift up the dust cover and rotate 90

. Plug the dust cover to the housing

slot. Insert the secondary receiver audio accessory to 3.5 mm audio

jack.

Figure 2.13: Attaching secondary receiver audio accessory

Optional Accessories

NOTE: Some part numbers may have regional prefix such as AA,

MD or AZ.

Failure Detected Indication and Handling

Any product error is indicated by alternating Red and Green blinks and

a failure detected indication (tone / voice prompt) will be heard. A few

seconds later the WRSM will recover.

Troubleshooting

If at any time the wireless connection cannot be re-established, or the

WRSM is operating incorrectly:

Procedure:

1 Power cycle the WRSM and the two-way radio.

2 Refer to “Pairing Your WRSM" on page 9” to repeat the connection

process.



Table 2.8: Optional Accessories

Part Number Description

RLN4941_

Earpiece with Coiled Cord and 3.5 mm RT Angle

Plug

RLN4885_ Receiver Earbud for Remote Speaker Microphone

