User's Guide

Table Of Contents
NOTICE: If the Rotary Mode is set to:
Dual or Volume – Display shows Auto Selected (OTB), volume can be set
only through Volume Knob.
Scroll – Display shows Auto Selected (Volume), volume can be set only
through Side
buttons.
Volume Adjust. – Sets the Side buttons to adjust volume level.
OTB Feature
– Sets the Side buttons to the predefined One-Touch Button features.
4.9.15
Default Setting
This sub-menu item resets the radio back to default settings.
4.9.15.1
Selecting Default Setting
Procedure:
1 From the home screen, press the Menu key.
2 Select SetupDef. Settings.
Your radio display Reset to def. settings?. Press Yes to confirm.
4.10
Group Setup
This menu item allows you to set the operation parameters, scanning and my groups folder.
4.10.1
Setting Operations Parameters
When and where to use: If you want to define the radio mode and the talkgroup at the radio startup,
and when changing modes TMO → DMO and TMO → Repeater.
Procedure:
1 From the home screen, press the Menu key.
2 Select Group SetupOperations Parameters.
3 Select Startup. Select one of the following:
TMO – the radio powers up in TMO mode.
DMO – the radio powers up in DMO mode.
Last Selected – the radio powers up in the mode it was in when last powered down.
4 Select Home Group Startup. Select one of the following:
Last Selected – the radio enters the TMO/DMO talkgroup which was last selected before
power down.
Home Group – the radio enters the Home Group (TMO or DMO) at power up, depending on
the radio mode entered at power up.
5 Select HGr TMO → DMO/Rep. Select one of the following:
MN001488A01-BF (en-US)
Main Menu
98
DRAFT