User's Guide

NOTICE: Infrastructure synchronizes the time and date. When not within the infrastructure
signal range you can set the values manually.
4.9.9.1
Setting the Time Format
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup → Time & Date → Format → Format Time.
3 Select one of the following:
• 12-Hour – Displays the time with am
(before noon) or pm (after noon) indication.
• 24-Hour – Displays the time in 24 hour format.
4.9.9.2
Setting the Time Manually
When and where to use: If the time cannot update automatically through the infrastructure.
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup → Time & Date → Set → Set Time.
3 Enter current time using Navigation keys.
4 Press Done.
4.9.9.3
Setting the Date Format
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup → Time & Date → Format → Format Date.
3 Select (D – day, M – month, Y – year):
• DD/MM/YY
• MM/DD/YY
• DD-MON-YY
• YY/MM/DD
4.9.9.4
Setting the Date Manually
When and where to use: If the time cannot update automatically through the infrastructure.
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup → Time & Date → Set → Set Date.
3 Enter current time using Navigation keys.
4 Press Done.
MN001488A01-BF (en-US)
Main Menu
93
DRAFT