User's Guide

Table Of Contents
Delete – deletes the device from the paired devices lists.
4.5.5
Disconnecting All Devices
When and where to use: To disconnect all remote devices connected to your radio.
Procedure:
1 From the home screen, press the Menu
key.
2 Select BluetoothDisconnect All.
All devices are disconnected.
NOTICE: To disconnect only one device, from the home screen, select MenuBluetooth
Devices, highlight the required device, and press Disconnect.
4.5.6
Setting Indoor Location
When and where to use: Indoor Location is used to track radio location while indoors. Your radio
receives beacon information from a number of dedicated beacons within range of the radio when
Indoor Location is activated. The radio then send the information within a LIP message to the SwMI,
and a mapping application will decode the information to calculate the radio location.
NOTICE: Your service provider can enable this feature.
Procedure:
1 From the home screen, press the Menu
key.
2 Select BluetoothIndoor Location.
3 Select Change.
4 Select On or Off to activate or deactivate Indoor Location.
Your radio is now able to detect Bluetooth location beacons when activated.
NOTICE: The use of the Indoor Location feature may have a negligible impact on other
Bluetooth functionality of your radio.
4.5.6.1
Viewing Detected Beacon
Prerequisites: Turn on Indoor Location. If Indoor Location is turned off, the screen displays Service
Restricted.
Procedure:
1 From the home screen, press the Menu key.
2 Select Bluetooth
Indoor Location.
3 Select Beacons Found.
4 Select desired beacon.
The screen displays details of the beacon.
MN001488A01-BF (en-US)
Main Menu
75
DRAFT