User's Guide

Table Of Contents
4.5.4
Devices
This menu item lists all devices paired with your radio and allows you to perform the following
operations:
Connect a device.
View and change device details.
Disconnect a device.
Delete a device.
4.5.4.1
Connecting or Disconnecting Devices
Prerequisites: Only pre-approved sensor devices can be used. The service provider is responsible for
configuring the radio to work with specific devices. See Add Bluetooth Devices on page 117.
Procedure:
1 From the home screen, press the Menu key.
2 Select BluetoothDevices.
3 Highlight the required device and press Menu/OK. Select Connect/Disconnect.
NOTICE:
Depending on languages installed on the radio, some characters in names of devices
might not be displayed properly.
Radio-initiated automatic reconnection with several remote Bluetooth devices at the
same time cannot be guaranteed to be successful in 100%, due to the fundamental
nature of Bluetooth. In case the reconnection fails after a power cycle (power off and
power on of the radio), reconnect the device manually.
4.5.4.2
Managing Devices
Procedure:
1 From the home screen, press the Menu
key.
2 Select BluetoothDevices.
3 Highlight the required device and press the Menu key.
Name – shows the name of the device (up to 32 characters long). The name is editable only
if it has not been pre-set by the service provider.
Type – displays the device type. This menu item cannot be configured.
Access – defines how the radio behaves during a reconnection attempt after losing
connection to this device:
Automatic – the radio connects with the device automatically.
NOTICE: On some headsets, you may have to press the "Call" button to trigger
reconnection.
Ask – the radio asks you for confirmation before connecting with the device.
Manual – the radio connects with the device manually.
Never – the radio never connects with the device.
MN001488A01-BF (en-US)
Main Menu
74
DRAFT