User's Guide

Table Of Contents

2.11

During a Call

During the call, label of the right Soft key indicates the next possible change. Accessory default setup

is:

Table 8: During the Call

Soft Key Label Audio Setting

Spkr Audio goes to the main speaker (Speaker HIGH is displayed)

Erpce Audio goes to the earpiece (Speaker LOW is displayed)

PHF Audio goes to the Personal Hands Free (Speaker LOW

is displayed)

2.12

Entering TMO or DMO Mode

Procedure:

1 From the home screen, press Options.

2 Select Trunked Mode/Direct Mode.

2.13

Selecting Talkgroups

Follow these procedures to select talkgroup manually. If the selected talkgroups is an InterSystem

Interface (ISI) talkgroup, your radio can migrate to another talkgroup linked network, changing the

talkgroup automatically.

Procedure:

From the home screen, use one of the following methods:

•

Press Left or Right Navigation key. Press Select to confirm.

• Select Options → TG by abc. Enter a talkgroup name and select the talkgroup name from the

list.

• Select Options → TG by Folder. Select a folder (for example, Favorite) and then a talkgroup

name.

NOTICE: Your radio can access up to three levels of the folder structure.

• Rotate Talkgroup Knob until the required talkgroup name is displayed.

2.13.1

Talkgroup Icons Selection

Talkgroup icons are used to indicate that a talkgroup has a special function, show the status of network

selection, and/or show the talkgroup properties. A talkgroup without an icon does not have a special

function attached to it.

MN001488A01-BF (en-US)

Getting Started

DRAFT