User's Guide

Table Of Contents
Icon Description
WAP Message Time – Displayed next to the create date in the message list view.
WAP Message Expiration – Displayed next to the expiry date in the message list
view.
WAP Message Title Icon – Displayed next to the title along with the text in the mes-
sage list view.
Keys Locked – Indicates that keys are locked.
Bluetooth Connected – Indicates that Bluetooth is enabled and at least one device
is connected.
Bluetooth Disconnected
Solid – Indicates that Bluetooth is enabled, but no device is connected.
Blinking indicates one of the following:
- Bluetooth is enabled and the radio is in the Discoverable Mode.
- Bluetooth is enabled and a connection with a remote device is being estab-
lished.
Remote Control – Indicates that the radio is being remotely controlled and some
commands are being executed in the background. For example, when the radio is
being controlled by special SDS messages or triggered to send a GNSS location re-
port.
2.6
Powering On the Radio
Procedure:
Press and hold On button.
Your radio performs a self-check and registration routine.
After successful registration, your radio is in service.
NOTICE: Your radio powers on without visible and audible notification if Covert Mode is
activated.
2.7
PIN Code Authentication
If pre-set by your service provider, the radio has active PIN Code Authentication, which helps you
increase security and protect your radio against unauthorized use.
The PIN code is read from the SIM card or radio programming and cannot be changed or disabled.
If
you are unable to unlock the radio, you cannot send or receive any call, nor adjust the volume level
with the Rotary Knob.
You are asked to enter the PIN code each time you turn on the radio.
MN001488A01-BF (en-US)
Getting Started
31
DRAFT