User's Guide

Table Of Contents
Icon Description
DMO Repeater Communication Mode – Indicates that the Repeater
or GW + Rep
option in DMO Mode is selected. The icon has the following status:
Solid – when the radio has detected the repeater (for example, when the radio
receives a presence signal).
Blinking – when the radio has not detected the repeater or during attachment.
No icon – during a radio-to-radio and gateway communication.
General Icons
All Tones Off – Indicates that:
Volume is set to 0 (when Volume Adj. Mode is set to Common).
Both simplex and duplex ring volume is set to 0 (when Volume Adj. Mode is set
to Individual).
Simplex Ring Muted – Indicates that simplex ring volume is set to 0 and duplex ring
volume is set to more than 0.
Duplex Ring Muted – Indicates that duplex ring volume is set to 0 and simplex ring
volume is set to more than 0.
Low Audio – Indicates that the audio mode is changed to low.
High Audio – Indicates that the audio mode is changed to high.
Earpiece Connected – Indicates that the earpiece is connected.
GNSS
Solid – the radio has a location fix.
Blinking – the radio is acquiring a location fix. This feature is an optional setting
and may not be enabled on your radio.
Battery Strength – Shows the charge of your battery.
Battery Charging – Indicates that the battery is charging.
Emergency – Indicates that the radio is in Emergency Operation.
Solid – Emergency Operations initiated.
Blinking – the radio is in emergency receiving state.
Disaster Alert Call – Indicates that the radio is in Disaster Alert Call.
New Message Has Arrived – Indicates that a new message has arrived.
New Message in Inbox – Indicates that you have unread messages in your Inbox.
Unread (New) WAP Message – Indicates that new page was loaded to the browser.
Man Down Active – Indicates that the Man Down feature is active.
MN001488A01-BF (en-US)
Getting Started
29
DRAFT