User's Guide

4.18.4
Viewing OPTA
When and where to use: Use this menu item to view Operational Tactical Address (OPTA) providing
supplementary information about a subscriber's organization and operational role.
Procedure:
1 From the home screen, press the Menu key.
2 Select Crypto Menu → Show OPTA.
4.18.5
Setting OPTA Filter
When and where to use: Use this menu item to define which characters are masked when the OPTA
name is displayed.
Procedure:
1 From the home screen, press the Menu key.
2 Select Crypto Menu → OPTA Filter.
3 Highlight check boxes using the Navigation keys and press Select to set which characters are
masked when the OPTA name is displayed.
4 Press Done
to confirm the changes.
4.18.6
Starting Crypto Registration
Prerequisites: Your radio cannot be in an active call nor in DMO.
Procedure:
1 From the home screen, press the Menu key.
2 Select Crypto Menu → Crypto Registr.
3 Select Start Registr to start the registration.
4.18.7
Configuring Audio Settings
When and where to use: Use this menu item to change the audio output for a group call when the call
is encrypted but the End-to-End Encryption is disabled.
Procedure:
1 From the home screen, press the Menu key.
2 Select Crypto Menu → Audio Settings.
3 Select Encr Audio On to enable or Encr Audio Off to mute the encrypted audio for clear mode.
4.18.8
Setting DMO Encryption Mode
Procedure:
1 From the home screen, press the Menu key.
MN001488A01-BF (en-US)
Main Menu
114
DRAFT