User's Guide

multiple talkgroup linked networks. Use this feature to migrate to another predefined network, when
you are out of the range of your network and your radio displays the No Service message.
Procedure:
1 From the home screen, press the Menu
key.
2 Select Networks → TG Net Sel → Select TG Net.
3 Select the required network from the list.
4.15.3.3
Using Prefer TG Net Registration
If the talkgroup selected is an Any Net talkgroup, this menu displays multiple networks allowed for
registration. If the talkgroup selected is an ISI talkgroup, this menu displays multiple talkgroup linked
networks. Use this feature to select a network that is most preferred. The selected network is the first
priority for scanning and registration.
Procedure:
1 From the home screen, press the Menu key.
2 Select Networks → TG Net Sel → Prefer TG Net.
3 Select the required network from the list.
4.15.3.4
Using Any TG Net Registration
When and where to use: Your radio has lost its network coverage and wants to increase the number
of networks it can scan and register. If the talkgroup selected is an Any Net talkgroup, this menu
displays all networks allowed for scanning and registration. If the talkgroup selected is an ISI talkgroup,
this menu displays all talkgroup linked networks allowed for scanning and registration.
Procedure:
1 From the home screen, press the Menu key.
2 Select Networks → TG Net Sel → Any TG Net.
Your radio selects and registers to the network automatically from the predefined list.
4.16
Location
NOTICE: This feature is a paid feature.
This sub-menu allows you to enable the GNSS, change GNSS accuracy, and view your position and
testpage.
See Global Navigation Satellite System (GNSS) Location Service
on page 121.
4.16.1
Enabling GNSS
Procedure:
1 From the home screen, press the Menu key.
2 Select Location → Interface.
MN001488A01-BF (en-US)
Main Menu
109
DRAFT