User's Guide

When the Covert Mode is turned off, all the changed settings are reverted to the previous state.
This feature can be used as the One-Touch Button.
4.8.6.1
Activating Covert Mode
Procedure:
1 From the home screen, press the Menu key.
2 Select Security → Covert Mode.
3 Select one of the following:
• On
– all tones are set to off, and the backlight and the LED are disabled immediately. The
group audio is routed to the earpiece. The radio displays Covert Mode On.
• Off – all settings for tones, backlight and audio are restored. The radio displays Covert
Mode Off.
4.8.6.2
Setting Vibrate in Covert Mode
Procedure:
1 From the home screen, press the Menu key.
2 Select Security → Covert Mode → Vibrate.
3 Select one of the following:
• On – To restore all vibrations.
• Off – To disable all vibrations.
4.8.7
Remote Control
There are two types of remote control, Short Data Service (SDS) Remote Control and Status Remote
Control.
4.8.7.1
Status Remote Control
Status Remote Control is a feature that provides limited control of the radio, unlike Short Data Service
(SDS) Remote Control.
NOTICE: Only one type of remote control can be active on a radio; either SDS or Status.
The following tasks can be assigned remotely to a radio:
Play loud tone until user interaction
The radio plays a loud tone as in the Man Down feature until you unlock the keypad (if needed) and
press the appropriate soft key labeled Exit.
The tone is played through the speaker even if an
accessory is attached.
NOTICE: The tone is not emitted when the radio is in one of the following states:
• In a call
•
Temporarily disabled
MN001489A01-BF (en-US)
Main Menu
83
DRAFT