User's Guide

Table Of Contents
Feature Description
Display GATT Service Da-
ta
Displays the GATT-based sensor data.
Display Heart Rate Displays the heart rate value received from the connected GATT-
based heart rate sensor.
Display Operational-Tacti-
cal Address (OPTA)
Displays the OPTA.
DMO Pre-emptive SDS Sends the next DMO SDS or status message with elevated priority.
Flip Display Rotates the display by 180 °.
Home Only Selects only home network.
Home Talkgroup on Home
Network
Selects only home network and home talkgroup network.
Inactive One Touch Key O The one-touch function assigned to the 0
key remains inactive until
you invoke the function by two long key presses on the button.
NOTICE: A single long key press on the 0 button will in-
stead call out the + symbol.
Initiate Call-Out Fallback Sends Call-Out Fallback Alert.
LIP Report Sends a message with the location of the radio to a dedicated ad-
dress.
Lock to Current Network Selects the current network only.
Message Inbox Displays the list of messages in Inbox.
PABX Call Setup Initiates a PABX call to a predefined entry in the contact list.
Phone Call Setup Initiates a phone call to a predefined entry in the contact list.
Prefer Talkgroup Network
Shortcut
Displays the Prefer Talkgroup Network menu.
Private Call Setup Initiates a simplex or duplex private call to a predefined entry in the
contact list or to the last group call originator.
Reset to Default Resets the radio to its default settings.
RMS MMI Menu Opens the RMS menu without activating RMS mode.
RMS Mode Activation or
Deactivation
Toggles RMS feature on or off.
RUI Logon or Logoff Asks for the credential or logs off the radio.
Scan for Bluetooth Devi-
ces
Activates scanning for Bluetooth devices once OTB assigned to the
Add Bluetooth Device function is pressed.
Select Talkgroup Network
Shortcut
Displays the Select Talkgroup Network menu.
Selecting Audio Profiles Scrolls through all available audio profiles.
Send Double Push PTT
Tone (D-PTT)
Sends the D-PTT tone to the currently used talkgroup.
Send Predefined Template
(PDT)
Sends a predefined message to a dedicated address.
MN001489A01-BF (en-US)
Getting Started
37
DRAFT