User's Guide

3 Press Menu → View.
Example: Radio displays SpeedNum1*, which means that this talkgroup speed number is 1.
5.17.2
Selecting Talkgroups by Index
Procedure:
1 From the home screen, enter talkgroup speed number and
*.
2 Press Attach.
NOTICE: To start a group call, press the PTT
button.
5.18
Terminal Permanent Disable
NOTICE: This feature is a paid feature.
Your radio is provided with a feature that allows your service provider to disable it permanently in case
it is stolen or lost. When your radio is disabled permanently, it becomes inoperable.
After a Permanent
Disable your service provider cannot enable your radio. It is recommended to Permanent Disable your
radio only when you do not expect to recover it. If it is recovered then a Permanent Disable radio can
be reactivated by returning it to Motorola Solutions.
5.19
Terminal Temporary Disable or Enable
Your radio is provided with a feature that allows your service provider to disable it temporarily in case it
is stolen. When your radio is disabled or is powered up in disabled state, it looks and acts like it is
turned off.
If your radio is found, your service provider can enable it again over the air. After your radio is enabled,
you may resume normal operation.
5.20
Writing Text
Every time that you see text entry screen, refer to this section.
5.20.1
Selecting Text Entry Modes
Prerequisites: Your radio displays the text entry screen.
Procedure:
1 Press Menu → Entry Mode.
2 Select one of the following:
• Primary – for entering alphanumeric characters.
• Numeric – for entering numbers only.
• Symbol – for entering symbols only.
MN001489A01-BF (en-US)
Features
130
DRAFT