User's Manual
Table Of Contents
- Contents
- Product Safety
- Introduction
- FCC Licensing Information
- Batteries and Chargers Safety Information
- Radio Overview
- Parts Of The Radio
- Battery Features
- About the Li-Ion Battery
- Battery Recycling and Disposal
- Installing the Lithium-Ion (Li-Ion) Battery
- Removing the Lithium-Ion (Li-Ion) Battery
- Holster
- Power Supply, Adaptor and Drop-in Tray Charger
- Battery Life Information
- Charging the Battery
- Drop-in Tray Charger Charge Status Indicators
- Drop-in Tray Charger Battery State of Charge Indications
- Estimated Charging Time
- Multi-Unit Charger Charge Status Indicators
- Multi-Unit Charger Battery State of Charge Indications
- Getting Started
- Advanced Radio Configuration
- Customer Programming Software (CPS)
- Troubleshooting
- Use and Care
- Motorola Limited Warranty for the United States and Canada
- Accessories
English
37
ADVANCED RADIO
CONFIGURATION
ADVANCED RADIO
CONFIGURATION
Advanced Radio Configuration provides you
with the ability to check and configure the
following settings from a pre-programmed list
without the need to use a computer.
The navigation is guided by an audible voice
prompt.
• Profile ID Number (PIN),
• Maximum Channels,
• Programmable Top Button Options, and
• Microphone Gain.
The Profile ID Number (PIN) feature allows
you set unique 4 digits profile identification
(0000 – 9999) to your radio.
The Maximum Channels feature sets the
number of maximum channels allowed in the
radio.
The Programmable Top Button Options
allows you to assign one of the following four
features to the Programmable Top Button:
• Private Reply,
• Private Direct Call,
• Call All Available, and
• Disabled.
Note: The default feature for the Programmable
Top Button is Private Reply.
Usage of the Direct Call feature requires a
User ID to be pre-programmed via the CPS.
The Microphone Gain feature allows you to
adjust the sensitivity level of the microphone to
fit different users or operating environment.
The default level of Microphone Gain is
“Normal”.
Entering Advanced Radio Configuration
To enter the Advanced Radio Configuration:
1. Turn OFF the radio.
2. Press the PTT, (+) and Power buttons
simultaneously and hold for 3~5 seconds. A