User's Manual
Table Of Contents
- Contents
- Product Safety
- Introduction
- FCC Licensing Information
- Batteries and Chargers Safety Information
- Radio Overview
- Parts Of The Radio
- Battery Features
- About the Li-Ion Battery
- Battery Recycling and Disposal
- Installing the Lithium-Ion (Li-Ion) Battery
- Removing the Lithium-Ion (Li-Ion) Battery
- Holster
- Power Supply, Adaptor and Drop-in Tray Charger
- Battery Life Information
- Charging the Battery
- Drop-in Tray Charger Charge Status Indicators
- Drop-in Tray Charger Battery State of Charge Indications
- Estimated Charging Time
- Multi-Unit Charger Charge Status Indicators
- Multi-Unit Charger Battery State of Charge Indications
- Getting Started
- Advanced Radio Configuration
- Customer Programming Software (CPS)
- Troubleshooting
- Use and Care
- Motorola Limited Warranty for the United States and Canada
- Accessories
English
29
GETTING STARTED
TRANSMITTING AND RECEIVING
• Press the (+) button to increase the volume, or
the (-) button to decrease the volume.
• To receive, listen through the speaker. To
respond, press the PTT (Push to Talk) and
WAIT to hear the Talk Permit Tone (a quick
double beep) BEFORE you start speaking.
Hold the radio vertically 1 to 2 inches (2.5cm to
5cm) from mouth when talking. Release the
PTT to listen.
• The Tx/Rx Indicator slow blinks RED when on
standby. When the radio is transmitting, the Tx/
Rx Indicator is solid RED.
• When the radio is receiving, the Tx/Rx
Indicator LED blinks RED quickly.
Talking to a Group in a Channel
To transmit, press the PTT (Push to Talk) and
WAIT to hear the Talk Permit Tone (a quick
double beep) BEFORE you start speaking.
PRIVATE REPLY
Note: All the DLR Series radio Programmable Top
Button is defaulted to Private Reply function.
If you need to change this setting, please
use the free online CPS software that is
available in
www.motorolasolutions.com/DLR.
Solid Red
Tx/Rx
Indicator
LED when
transmitting