User Manual

Setting Screen Saver
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Display → Screen Saver.
3 Select one of the following:
• Activate — To activate/deactivate this feature. Select one of the following sub-options:
• Auto — Makes the screen saver activate automatically after an amount of time.
• Disabled — Disables the screen saver.
• Text — To set the text on the screen saver when this feature is activated.
Setting Backlight
When and where to use: To save the battery power.
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Display → Backlight.
3 Select one of the following:
• Auto – backlight is triggered by turning on the radio, by pressing any key on the device or on
the accessory that is connected to it. Also charging or getting signal from the services like:
Call-Out message, RUA request, DGNA and TX timeout during priority call are going to turn
on the backlight.
• Semi Auto – backlight is turning on when you are switching on the radio, pressing assigned
button to the backlight feature, or charging.
• Disabled – backlight is disabled and the display is always dimmed.
Setting Brightness
When and where to use: To set the luminance of the display and the keypad in an environment with
low visibility.
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Display → Brightness.
3 Manually adjust the brightness level using the right or the left NAVIGATION key.
Setting LCD Off
When and where to use: This feature sets the time so the display automatically turns off after a
specific amount of time.
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Display → LCD Off.
3 Select one of the following:
• Disabled — your radio display never goes off.
Chapter 5: Main Menu
96 Send Feedback