User Manual

Using Low Audio
When and where to use: Use it when placing and receiving a Phone, PABX, and Duplex Private calls.
Procedure:
1 Hold your radio as you would a telephone.
2 Speak into the bottom microphone and listen through the earpiece.
Keep the antenna at least 2,5 centimeters from your head and body.
During the Call
During the call, label of the right SOFT key indicates the next possible change. Accessory default setup
is:
Table 11: During the Call
Soft Key Label Audio Setting
Spkr Audio goes to the main speaker (Speaker HIGH is displayed)
Erpce Audio goes to the earpiece (Speaker LOW is displayed)
PHF Audio goes to the Personal Hands Free (Speaker LOW is displayed)
Writing Text
Every time that you see text entry screen, refer to this section.
Related Links
Unlocking Your Radio on page 35
Selecting Text Entry Modes
Prerequisites: Your radio displays the text entry screen.
Procedure:
1 Press MENU → Entry Mode.
2 Select one of the following:
• Primary — for entering alphanumeric characters.
• Numeric — for entering numbers only.
• Symbol — for entering symbols only.
• Secondary — for entering alphanumeric characters (this mode is optional and you have to
add it to the list). It is convenient when you use one language, and sometimes wish to switch
to another one.
NOTICE: In the text entry screen, you can also press # key repeatedly to toggle through
the entry modes.
Selecting Text Entry Methods and Languages
Prerequisites: Your radio displays the text entry screen.
Chapter 2: Getting Started
Send Feedback 41