User Manual

Table 8: Status Icons
Icon Description
Trunked Mode Operation
In Service
No Service
Signal Strength – The more bars, the stronger the signal.
RF Power — Indicates the High RF Power is enabled. Shows the signal strength.
The more bars, the stronger the signal.
Migration — Displayed when your radio is registered to the foreign network.
Broadcast Call — Displayed when the radio is in the Broadcast Call.
Scan — Indicates talkgroup scanning is activated in the radio.
Packet Data / Multi-Slot Packet Data (MSPD) — The more blue sections on the icon,
the faster the data transfer. Possible three states:
• Four gray sections: context activated – data idle
• One blue (from the left): Packet Data active
• Two blue (from the left): Multi Slot Packet Data active
Direct Mode Operation
Direct Mode Call — Displayed when the radio is receiving a Direct Mode call. The
more bars, the stronger the signal.
or
High RF Power: idle or transmitting — Displayed when the High RF Power option is
enabled and the radio is either in the idle mode or transmitting a call.
High RF Power: receiving — Displayed when the High RF Power option is enabled
and the radio is receiving a call.
Direct Mode — Displayed when the radio is in Direct Mode (radio-to-radio communi-
cation).
DMO Gateway Communication Mode — Indicates that gateway is selected. The
icon has the following states:
• Solid — while the radio is synchronized with the gateway.
• Blinking — while the radio is not synchronized or during attachment.
• No icon — during a radio to radio and repeater call.
DMO Repeater Communication Mode — Displayed when the Repeater or GW +
Rep option in DMO Mode is selected. This icon has the following states:
• Solid — while the radio has detected the repeater (for example when the radio
receives a presence signal).
• Blinking — while the radio has not detected the repeater or during attachment.
• No icon — during a radio to radio and gateway call.
Table continued…
Chapter 2: Getting Started
32 Send Feedback