User Manual

Using the Foreign Network Registration
When and where to use: Use this feature to migrate to another predefined network, when you are out
of the range of your network and your radio displays the No Service message.
Procedure:
1 From the home screen, press the MENU key.
2 Select Networks → Networks Sel → Foreign Nets.
Location
See the GPS Location Service for more information.
Related Links
GPS Location Service on page 63
Viewing Your Position
Procedure:
1 From the home screen, press the MENU key.
2 Select Location → Position.
3 Scroll to view the results about the last time your location was calculated.
NOTICE: To refresh your position:
• Select Position — the radio refreshes its position automatically
• Press Refresh
Viewing Testpage
Procedure:
1 From the home screen, press the MENU key.
2 Select Location → Testpage.
3 Select one of the following:
• Position – displays detailed information on radio’s current position: time, N (latitude), E
(longitude), H (height), Sats Used (a number of tracked satellites), B (bearing), HS
(horizontal speed), LC (level of confidence).
• Power – displays detailed information on a particular satellite: PRN code, Status, Mode, C/N
(carrier-to-noise ratio).
• Version – displays detailed information on GPS version: SW (software version), HW
(hardware version), ASIC (application-specific integrated circuit), RC (release code).
Changing GPS Accuracy
Procedure:
1 From the home screen, press the MENU key.
2 Select Location → Accuracy.
3 Select one of the following:
Chapter 5: Main Menu
Send Feedback 111