User Manual

Related Links
Entering TMO / DMO Mode on page 36
Selecting Network Operation Mode on page 110
Selecting Network Operation Mode
Procedure:
1 From the home screen, press the MENU key.
2 Select Networks.
3 Select one of the following:
• Networks Sel — Selects the network to which the radio is allowed to register.
• Trunked Mode — Switches to the mode using infrastructure.
• Direct Mode — Switches to the mode without using infrastructure.
• TXI Mode — Select Activate to stop sending any radio transmission.
NOTICE: If the radio is in TXI Mode, it is not possible to switch from Direct Mode to
Trunked Mode.
Related Links
Entering TMO / DMO Mode on page 36
Networks on page 109
Selecting Your Network
Procedure:
1 From the home screen, press the MENU key.
2 Select Networks → Networks Sel → Home Only.
3 Your radio registers to the home network. If several home networks are defined, the radio
registers to the first available network on the list.
Using the Select Net Registration
When and where to use: Use this feature to migrate to another predefined network, when you are out
of the range of your network and your radio displays the No Service message.
Procedure:
1 From the home screen, press the MENU key.
2 Select Networks → Networks Sel → Select Net.
3 Select the required network from the list.
Your radio registers to the selected network.
Chapter 5: Main Menu
110 Send Feedback