User's Manual
Table Of Contents
- DTR550 & DTR650 Series Radios
- Foreword
- Table of Contents
- FCC Licensing Information
- Chapter 1 Introduction
- Notations Used in This Manual
- Your DTR Series Radio
- Getting Started
- Battery
- Charging the Radio
- Attaching the Battery
- Swivel Belt Holster
- Mini Keyboard
- Attaching the Mini Keyboard to the Radio
- Disconnecting the Mini Keyboard from Your Radio
- Entering Text with the Mini Keyboard
- Yellow/Lock Key Functionality
- Green/Lock Key Functionality
- CAPS Key Functionality
- Standard Yellow Function Green Function
- Using Mini Keyboard Key Shortcuts
- Extended Character Set
- Accent Marks
- Other Special Characters
- Accessories
- Chapter 2 General Radio Operations
- Chapter 3 Advanced Radio Operations
- Chapter 4 Radio Programming
- Chapter 5 Cloning Mode
- Chapter 6 Troubleshooting
- Chapter 7 Motorola Limited Warranty for the United States and Canada
- Index
February 10, 2005 9980384R89-O
5-2 Cloning Mode: Cloning Using the Cloning Cable
2. Connect the cloning cable to both radios.
NOTE: The target radio must be turned on, but does not need to be in cloning mode.
3. Press under Clone to start the cloning. The “Cloning in Progress” screen is displayed
followed by the “Cloning Successful” screen. If a problem occurs the “Cloning Failed” screen
appears.
4. After cloning is completed, the target radio displays the following screen.
5. Turn target radio off then back on again to use.
6. Press under Reset to exit the Clone menu.
Radio Cloning
Completed
Please Turn Off.