User's Manual
Table Of Contents
- DTR550 & DTR650 Series Radios
- Foreword
- Table of Contents
- FCC Licensing Information
- Chapter 1 Introduction
- Notations Used in This Manual
- Your DTR Series Radio
- Getting Started
- Battery
- Charging the Radio
- Attaching the Battery
- Swivel Belt Holster
- Mini Keyboard
- Attaching the Mini Keyboard to the Radio
- Disconnecting the Mini Keyboard from Your Radio
- Entering Text with the Mini Keyboard
- Yellow/Lock Key Functionality
- Green/Lock Key Functionality
- CAPS Key Functionality
- Standard Yellow Function Green Function
- Using Mini Keyboard Key Shortcuts
- Extended Character Set
- Accent Marks
- Other Special Characters
- Accessories
- Chapter 2 General Radio Operations
- Chapter 3 Advanced Radio Operations
- Chapter 4 Radio Programming
- Chapter 5 Cloning Mode
- Chapter 6 Troubleshooting
- Chapter 7 Motorola Limited Warranty for the United States and Canada
- Index
Chapter 5 Cloning Mode
Cloning mode is used to either add contacts wirelessly to other radios (Private or Groups) or
duplicate all radio settings to new radios (using the optional cloning cable).
Entering Cloning Mode
1. Press to turn the source radio on.
2. Enter the cloning mode by performing the following steps in sequence:
a. Hold down and press the PTT button three times.
b. Press the Left .
c. Press .
d. Press the Right
e. Hold down and press the PTT button three times. The Clone Menu appears.
Cloning Using the Cloning Cable
1. From the Clone menu, scroll to select Duplicate Radio and press under Select. The fol-
lowing screen is displayed indicating the target radio must now be connected to the source
radio to be cloned using the cloning cable.
Duplicate Rad...
Select
Clone Menu
Send Contact
Reset
Connect Clone
Clone
Back
Cable and
Press Clone