User's Manual

53
Features for the Hearing Impaired
To use these services, you must install the iDEN
Wireless Data Services software (available
separately). For more information on setting up
your computer and your i670 phone for packet and
circuit data calls, refer to the Wireless Data
Services User’s Guide or contact your service
provider.
Features for the Hearing
Impaired
Using Your Phone With a Hearing Aid
Setting your phone for use with a hearing aid
affects sounds from the phone’s earpiece when
you are in a phone call.
Choosing Your Hearing Air Setting
Note: Your phone may not include this feature.
1 From the main menu, select Settings > Phone
Calls > Hearing Aid.
2 Set this option to Telecoil. Telecoil coupling is
now optimized. -or-
Set this option to Microphone. Microphone
coupling is now optimized.
If Your Hearing Aid Is Equipped With a Telecoil
Activate the telecoil setting for your behind the ear
hearing aid (BTE). Once the telecoil is activated
your hearing aid will be adjusted for optimum
handset use. When the telecoil is active the
microphone is inactive eliminating any chance of
feedback (squeal). The handset is inductively
coupled directly to your hearing aid enabling clear,
feedback free telephone usage.
Note: Please refer to your hearing aid user
guide to find out if your hearing is
equipped with a telecoil.
Approximate telecoil location is
within 6-13 mm of this location.
Approximate telecoil location,
check hearing aid user guide
for specific location.
Off - Shut off
M - Microphone
T - Telecoil