User's Manual

60
STAT-ALERT
FEATURES
If the page is successful
PTT-ID
Stat-Alert PTT-ID is a per-mode feature describing
an identiÞcation code transmission that is tied to the
PTT switch. The ID code is automatically sent every
time a voice transmission occurs (that is, the PTT
switch is pressed). When PTT-ID comes before the
voice transmission, you will hear a tone until the ID
transmission is completed; this helps you avoid
talking while the ID code is being transmitted. This
tone can be disabled on a per-radio basis. Also, the
ID code transmission can be programmed to follow
the voice transmission.
RADIO CHECK
This feature allows the dispatcher to determine if a
radio unit is on the air without disturbing the radio
operator. This is a useful tool for the radio dispatcher
to use for routine maintenance checks, or if there is
reason to doubt the availability of a radio unit. When
the dispatcher "checks" for the radio, the radio will
receive the command and automatically
acknowledge it. The transmit (red) LED will light
when the radio sends the acknowledgement.
EMERGENCY OPERATION
Please refer to Emergency Operation on page 46.
5b. Press the PTT switch to send the ID number
again, or press . to hang up and return to
the home display.
5a. If you hear Þve beeps, the radio you are pag-
ing is on the air and has received your page.
5b. The radio automatically
returns to the home dis-
play
PLANT POLICE
ATS2500
.
book Page 60 Monday
,
December 18
,
2000 7:39 PM