User's Manual

RADIO OVERVIEW
6
3. Side Button 1/Select Key (programmable)
Recommended for the Monitor Button. Also
functions as the select key when programming
your radioÕs lists.
4. Push to Talk (PTT) Button
Press and hold down this button to talk, release
it to listen.
5. Side Button 2 (programmable)
6. Side Button 3 (programmable)
7. Top Button (programmable)
Recommended as Emergency button.
8. LED Indicator
The indicator LED on top of the radio indicates
radio operating conditions.
9. Microphone
Speak clearly into the microphone when send-
ing a message.
10. Antenna
11. Accessory Connector
Connects headsets, remote speaker/micro-
phones and other accessories. Replace
attached dust cover when not in use.
Additionally for keypad radios (Model II), there are
12. LCD Screen
13. Menu Keys
14. Keypad
With PTT switch pressed (radio
transmitting)
Continuous red LED Normal transmission.
LED unlit Radio is not transmitting.
Blinking red light
Low battery (conventional mode
only; programmable from the
CPS)
With PTT switch released (radio
receiving)
Blinking red light
Mode busy (conventional mode
only).
Blinking green light
Receipt of a telephone call, Pri-
vate Conversation call, or Call
Alert page.
ATS2500
.
book Page 6 Monday
,
December 18
,
2000 7:39 PM