User's Manual

44
TELEPHONE
OPERATION
Sending the Telephone number using a Location in
the Telephone List
Having the Conversation and Hanging Up
Note: You can press the pre-programmed phone
button for quick access to the telephone call fea-
ture. This will take you directly to step 3.
¥ The ÒPLEASE WAITÓ message is a timed
message. If you cannot access the telephone
system (no dial tone heard), press . key or
the phone button to hang up, and start again at
step 1 of this procedure.
¥ If you are out of range of the trunked system
or the phone interconnect is out of service, ÒNO
PHONEÓ is displayed and a continuous low-
pitched tone sounds.
¥ If the trunked phone interconnect is in use, a
busy tone sounds and ÒPHONE BUSYÓ is dis-
played.
6a. Press , or /, to enter the telephone
list.
6b. Enter the location (any preprogrammed loca-
tion from 1 through 19) of the number you
wish to call.
6c. The radio will go to the selected location.
6d. The display alternates
between showing the
memberÕs name and
telephone number.
Alternates between
and
6e. Press the PTT button.
6f. The telephone number
will be sent out; you will
hear tones as they are
sent.
6g. If you hear a busy signal, go to step 8 for
hang-up procedure.
POLICE DEPT
5556445
POLICE DEPT
7. If call is answered, communicate in the normal
manner. Press the PTT switch to talk; release
the PTT to listen.
8. When Þnished with your conversation, or if the
number you called is busy or does not answer,
press . or the phone button to send the
hang-up code.
9. The radio will return to
the home display.
PLANT POLICE
ATS2500
.
book Page 44 Monday
,
December 18
,
2000 7:39 PM