User's Manual

42
TELEPHONE
OPERATION
TELEPHONE OPERATION
This section outlines the telephone operations of your
radio. All references to what is shown on the display is
only valid for Model II radios. Throughout this section,
the display below
is used to indicate the radioÕs home display.
The telephone feature allows you to use your radio
similar to a standard telephone.
When you are dialing from the keypad, your radio
may be programmed with either buffered dial (you
enter all digits and press the PTT before the digits
are sent out) or live dial (each digit is sent out as it is
pressed).
Answering a Telephone Call
Note: The call received status annunciator, F,
ßashes when you receive a call, but is not dis-
played when you answer the call.
Making a Telephone Call
(for Model II radios only)
There are three phases in making a phone call,
namely
¥ accessing the telephone system,
¥ sending the telephone number,
¥ having the conversation and hanging-up.
Accessing the Telephone System
1. When a telephone call is
being received, you will
hear telephone-type
ringing.
Alternates between
and
2. Press the pre-pro-
grammed phone button
or call response button
to answer the call.
PLANT POLICE
PLANT POLICE
PHONE CALL
PHONE CALL
3. Carry on with your conversation in the normal
manner. Press the PTT switch to talk; release
the PTT to listen.
4. When you have Þnished your conversation,
press . or the phone button to hang up.
5. The radio will return to
the home display.
1. Press / until PHON
is displayed.
2. Press l (the softkey below PHON).
PLANT POLICE
MSG
SCAN
PHON
ATS2500
.
book Page 42 Monday
,
December 18
,
2000 7:39 PM