User's Manual

39
PROGRAMMING THE
RADIO
PROGRAMMING THE RADIO
This section outlines the programming functions of
your radio, and is only valid for Model II radios.
Throughout this section, the display below
is used to indicate the radioÕs home display.
Programming the
Telephone List Numbers
This feature lets you use the radioÕs keypad to
change the telephone numbers assigned to any of
the telephone list members. Each phone number
can have up to 16 digits.
To change the telephone list
1. Press / until PROG
is displayed.
2. Press l (the softkey
below PROG).
3. Press ; (the softkey
below PHON). The dis-
play shows the Þrst pro-
grammable member of
the telephone list.
PLANT POLICE
PROG
SCAN
PHON
CALL
FIRE DEPT
4. Press / or ,,
ÑorÑ
Use the keypad to enter the desired memberÕs
position number (1 to 19) to view the other
members of the telephone list.
5. When you stop on a
member of the list, the
display will alternate
between showing the
memberÕs name and
telephone number.
Alternates between
and
6. Press the select key to enter edit mode.
7. A short press would
enable the editing of the
telephone number. The
display shows the cur-
rent memberÕs telephone
number.
8. A long press would
enable the editing of the
memberÕs name. The
display shows the cur-
rent memberÕs name.
POLICE DEPT
5556213
5556213
POLICE DEPT
ATS2500
.
book Page 39 Monday
,
December 18
,
2000 7:39 PM