User's Manual

37
SCAN
Note: The programming-mode annunciator, K, is
displayed while list view mode is active.
¥ The scan status annunciator, G, appears,
indicating that a scan list is being viewed.
¥ The dot of the priority scan annunciator, H,
blinks if the current displayed member of the
scan list is a priority 1 mode, and is solid the cur-
rent displayed member of the scan list is a prior-
ity 2 mode.
Programming a Scan List
(for keypad radios only)
The program scan list feature allows you to program
the members of the scan list associated with the
currently selected mode.
To program a scan list
Note: The programming-mode annunciator, K,
blinks while program mode is active.
¥ The scan status annunciator, G, appears,
indicating that a scan list is being viewed.
¥ The dot of the priority scan annunciator, H,
blinks if the current displayed member of the
scan list is a priority 1 mode, and is solid the cur-
rent displayed member of the scan list is a prior-
ity 2 mode.
1. Press / until
PROG is displayed.
2. Press l (the soft-
key below PROG).
3. Press l (the soft-
key below SCAN).
The display shows
the current mode
selected.
For example
PROG
SCAN
PHON
CALL
FIRE DEPT
4. Use the mode selector knob to select the
required talkgroup zone.
5. Press , or / to select the required
zone. If the scan status annunciator G is
displayed, the mode is part of the scan list.
6. Press the select key to change the scan
mode (see ÒScan ModesÓ on page 38).
7. After making all the changes, select the
required operating mode.
8. Press the HOME key, or the PTT switch, or
turn the mode selector knob to commit all
the changes made.
ATS2500
.
book Page 37 Monday
,
December 18
,
2000 7:39 PM