User's Manual

36
SCAN
Note: The scan status annunciator, G, is dis-
played when the scan operation is active. It will
be removed from the display when the scan
operation is terminated.
Deleting Nuisance Modes
When the radio scans to a mode you do not wish to
monitor (nuisance mode), you can temporarily delete
that mode from the scan list.
Note: Priority modes cannot be deleted.
Viewing a Scan List
(for keypad radios only)
The view scan list feature allows you to view the
members of the scan list associated with the currently
selected mode.
To view a scan list
3. Press the softkey
below the desired
scan state (on or off).
The radio returns to
the home display.
1. When your radio is locked on the mode to be
deleted, press the nuisance-mode delete
button (programmed via the CPS).
2. A valid-keypress chirp is heard, indicating
that the mode has been deleted.
3. The radio continues scanning the remaining
modes in the list.
4. To resume scanning the deleted mode, you
must leave and reenter scan operation.
PLANT POLICE
1. Press / until
VIEW is displayed.
2. Press l (the soft-
key below VIEW).
3. Press ; (the soft-
key below SCAN).
The display shows
the Þrst member of
the scan list.
For example
4. Every subsequent press of / will scroll
through subsequent members of the scan
list.
5. To leave the scan list feature, press the
HOME key, or the PTT switch, or turn the
mode selector knob.
6. The radio returns to
the home display.
PAGE
STS
VIEW
PHON
SCAN
CALL
FIRE DEPT
PLANT POLICE
ATS2500
.
book Page 36 Monday
,
December 18
,
2000 7:39 PM