User's Manual

34
CONVENTIONAL
FEATURES
¥ Transmit Inhibit on Busy Mode with Wrong
Squelch CodeÑyou are prevented from trans-
mitting on an active mode with a squelch code
other than your own. If the PL code is the same
as yours, you are allowed to transmit.
¥ Quick-Key OverrideÑThis feature can work in
conjunction with either of the two above varia-
tions. This feature allows you to override the
transmit-inhibit state by quick-keying (two PTT
presses within a programmable period -- the
default is one second -- of each other) the radio.
Note: If you try to transmit (press the PTT) on a
smart PTT mode that is busy, a continuous alert
tone is generated until the PTT is released; the
transmission is inhibited.
¥ The red LED blinks when the radio is receiv-
ing indicating that the mode is busy.
ATS2500
.
book Page 34 Monday
,
December 18
,
2000 7:39 PM