User's Manual

30
TRUNKED FEATURES
To enter a number from a location in the call list
Note: The last member of the list is also the Òlast ID
transmitted or receivedÓ at position Ò00Ó on the
list.
¥ If you enter a location number that does not
exist (for example, Ò15Ó), the display will show
ÒINVALID ENTRY,Ó and the radio will sound an
invalid-keypress tone and return back to step 4b
of this procedure.
Sending the Call Alert
4b. / takes you forward to the Þrst or next
member of the list; , takes you backwards
to the last or previous member of the list.
4c.
When at a member of
the list, the display alter-
nates between showing
the memberÕs name and
ID number.
Alternates between
and
4a. Press either , or / to enter the call
list.
4b. Enter the Þrst digit of the location number. If
there are fewer than 10 members in the list,
go directly to step 4e.
4c. If there are 10 or more members in the list,
the display shows ÒID LOC#X_Ó (where X is
the Þrst digit). The cursor blinks to show the
location of the second digit.
4d. Enter the second digit of the location number.
CK TANG
ID: 784116
4e. The radio goes to that
position in the list. The
display alternates
between showing the
memberÕs name and ID
number.
Alternates between
and
5. Press the PTT switch to transmit the ID num-
ber.
CK TANG
ID: 784116
ATS2500
.
book Page 30 Monday
,
December 18
,
2000 7:39 PM